Available in a wide selection of ready-mix colors and a patented low-VOC tinting base, our high-quality oil-based wiping stain helps you achieve a beautiful, consistent finish.
Olympic Premium Wood Stain tint base is a low-VOC, environmentally preferred product that meets the Leadership in Energy and Environmental Design (LEED) Green Building Rating System, which was developed by the U.S. Green Building Council (USGBC).
Patented low-VOC technology
Low odor
Unique Absorption Control™ formula helps provide a beautiful, consistent finish
Prevents blotching, streaking and lap marks
Penetrates deep to enhance grain and accent wood’s natural beauty
Rich color for added beauty
Does not raise wood grain
Goes on smoothly with brushes, cloths or pads
Ideal for all soft, hard, new and stripped woods
Apply with a quality natural bristle brush, cloth or foam applicator. The longer the stain is left on the wood, the deeper it will penetrate the wood spores and the darker the resulting color will be. For a light tint, wipe off the excess stain in two or three minutes. For dark, rich color, let the stain stay on for 10 minutes or more.
Always wipe off excess stain to remove any that has not been absorbed by the wood. To remove excess stain, wipe across the grain with a clean, lint-free cloth. Before the stain dries, make a final finishing wipe in the direction of the grain.
A second coat can be applied to darken the color. To lighten the color, wipe the wood with mineral spirits while the stain is still wet.
Furniture
Cabinets
Paneling
Trim
Doors
Floors
Approximate Coverage:
125 sq. feet per quart
Drying Time:
Allow 24 hours before general use
Recoating Time:
After eight hours
Cleanup:
Mineral spirits or paint thinner
Colors:
Low-VOC base tints to 36 colors (Gallons & Quarts)